Aluminum Tubular Picket Railing System use for protection introduction:
Aluminum Tubular Picket Railing System use for protection,the panels are manufactured with strong steel pickets and rails available in a wide range of sizes and styles. Steel Tube / Bar Panels are attached with high-strength steel or aluminum brackets to galvanised square tubular steel or aluminum posts. The Spear top design of this tubular fence creates an aesthetically pleasing fence which at the same time deters intruders. This security level ornamental fence is suitable for gardens, residential, industrial and commercial properties, schools, pools and boundary fencing.
Aluminum Tubular Picket Railing System use for protection produce process:
1. First cut the steel or aluminum tube into the required length
2. Press spear tops
3, Punching holes of steel tubes
4. Use the mould to fix the cut tube then weld the rail and pickets. there are two welding methods:
- A. full welding
- B.point welding
5. Washing / Surface Cleaning: The workers first use the small polish machine to polish the welding points one by one. After finished all the welding,using the big polish machine (steel sand ) to wash the oil.
6. Surface Treatment: Then finish the zinc plating. The last surface treatment can be hot dip zinc plating or zinc plating plus power coating.
Aluminum Tubular Picket Railing System use for protection
Typical Horizontal Bar, Vertical Bar and Installation Information
| Installation height (mm) | Post spacing (mm) | panel | post |
| Plate dimension (mm) | Horizontal bar quantity | Horizontal bar profile dimension (mm) | Vertical bar profile dimension (mm) | Length (mm) | Dia O.D (mm) |
| 1600 | 3000 | 2980*1500 | 3 | 40x60x1.5 | 25x25x1.2 | 1900 | 80x80x2 |
| 1900 | 3000 | 2980*1800 | 3 | 40x60x1.5 | 25x25x1.2 | 2200 | 80x80x2 |
| 2300 | 3000 | 2980*2200 | 3 | 40x60x1.5 | 25x25x1.2 | 2600 | 80x80x2 |
Product Tags:
|
|
Tubular Aluminum Picket Railing System 1.8m-2.4m Width For Protection Images
|
